Sleva!

StabiliSENSE™ Critical Room Status Monitor – Accuracy +/- 0,25%Pressure units INWC (inH₂O)Max. pressure 0,5Min. pressure -0,5Material Plastic Nejprodávanější

Původní cena byla: 1 032,00 Kč.Aktuální cena je: 433,44 Kč.

Doprava zdarma od 4 500,00 Kč Rychlé doručení po celé ČR
Bezpečná platba Šifrovaný a chráněný checkout
14 dní na vrácení Vrácení bez zbytečných komplikací

Popis

The Series RSMC StabiliSENSE Critical Room Status Monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, school nurses offices, laboratories, and vivariums.

The RSMC is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSMC StabiliSENSE critical room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.

Each RSMC includes a factory calibration certificate.

Product Applications:

Hospital isolation rooms, Pharmaceutical facilities, Dental offices, School nurse offices, Semiconductor manufacturing facilities.

The model configurator above works with INWC pressure units (inch of water column, inHO). 1 INWC = 249.1 Pa, see table below.

RANGES (conversion of INWC [inHO] to Pa/kPa)
INWC Pa kPa
0,100 24,91
0,250 62,27
0,500 124,5 0,1245
1,000 249,1 0,2491
2,500 622,7 0,6227
5,000 1245 1,245
10,00 2491 2,491
25,00 6227 6,227
50,00 12,45
100,0 24,91

SPECIFICATIONS:

Alarm: 69.1 dB 10 cm from display
Display: 4.3″ (10.9 cm) color TFT LCD, dimmable; resolution 480 x 272 px
Display Measuring Units: °C, °F, Pa, kPa, cm w.c., mm w.c., in w.c.
Output Signal: current, voltage, digital
Input Control Signal: 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc
Materials, Wetted: ABS, PMMA, Polycarbonate
Data Interface: BACnet MS/TP, Modbus RTU
Operating Temperature: 0 to 50 °C
Supply Voltage: 24 Vac/Vdc
Power Consumption: 3.6 W

Complete informations can be found in the spec sheet (PDF), see the „Download“ section.